ISABELLENHUETTE公司的基于分流器的电流和电压传感器

IAS - Analogue Current Sensor for High-Side Shunt-based Current Monitoring


The new sensor, the IAS, does not require a digital interface or digital converter, reducing size and costs – an important benefit for users in many different fields (e.g. automotive applications, energy management systems and general current sensing applications). The choice of used shunts ranges from 0.1 to 1 mOhm, meaning the measurement area and the dynamic range can be set for up to 100 dB; with a 500-μOhm, for example, pulse current of 800 A can be measured for 100 ms at a resolution of more than 20 mA.

Data sheet IAS_E_Analog current sensor modul for highside applications.pdf


IPC - Isolated current measurement module for phase current measurement


The IPC series of current measurement modules for the motor phase current on measurement shunt basis are designed to control electric high-performance motion control units of all types. The data acquisition runs at sampling rates from 10 to 300 kHz. A programmable sampling delay time triggered with an external signal is supported. The modules also supply a fast over current signal (response time<3μsec).

Data sheet IPC_E_Isolated phase current measurement modules.pdf


IVT-A - Precision current sensing and voltage measurement in hybrid and electric vehicles


Critical charge and discharge cycles can be accurately measured with the IVT-A sensor module. It is designed for use in bms battery management systems and is completely configurable for customer applications.Its features deliver outstanding performance.

Data sheet IVT-A English.pdf


IMC - Extended calibrated Sensor module for the direct measurement of current, voltage and temperature


Extended calibrated Sensor module for the direct measurement of current, voltage and temperature with a 3.3V or 5V level RS232 interface. The module is designed for direct operation in more advanced measuring systems such as current-measuring devices, data logger and bms battery management systems. Calibration at customer's is unnecessary.

The current measurement takes place via a 100 μΩ shunt. An ISA-ASIC data acquisition system serves as measured value acquisition. With a measuring range of ±300 A at a resolution of 50 mA and a voltage measuring range of ±30 V at a resolution of 1 mV, the system offers the possibility of achieving exact current and voltage measurements at high resolutions.

Data sheet IMC-A-R0001 Datasheet_IMC-A-R0001.pdf

Data sheet IMC-B-R0001 Datasheet_IMC-B-R0001.pdf


IMS - Sensor module for the direct measurement of current, voltage and temperature


The module is designed for direct operation in more advanced measuring systems such as current-measuring devices and bms battery management systems.

The current measurement takes place via a 100 μΩ shunt. An ISA-ASIC data acquisition system serves as measured value acquisition. With a measuring range of ±1500 A at a resolution of 50 mA and a voltage measuring range of ±30 V at a resolution of 1 mV, the system offers the possibility of achieving exact current and voltage measurements at high resolutions.

Data sheet IMS-B-R0001 Datasheet_IMS-B-R0001.pdf
 
 
IUR-A-R0001



Mobile 4-channel data acquisition system for the precision current sensing, measurement of direct voltage and temperature (via optional Pt100 sensor). To be connected directly to the USB-2.0-Port of PC or laptop.

Datasheet IUR_USB-Data-Acquisition-System for μV - kA up to 10kHz.pdf
 


IHC-A-RM01

Galvanically insulated precision current sensing and voltage measuring system for a variety of current ranges up to very high currents. The system is designed for operation directly on the busbar. The IHC-A-RM01 can be used as a precise- and simple-to-operate alternative to Hall effect or compensation converters as well as to conventional combinations of DIN-Shunt and measuring device/instrument transformer.Besides the precision, the advantages (compared with Hall effect and compensation converter) are a low power loss and therefore self-heating (compared with DIN shunt).As an output signal a 3.3 V or 5 V RS232, RS485 and ethernet.

Preliminary data sheet Preliminary_datasheet_IHC.pdf